Epoxy Resin

epoxy resin tops

Epoxy Resin is a quality material that is resistant to most chemicals, moisture, impact and heat; it’s the ideal solution for environments that are very corrosive or have a high level of moisture. OnePointe Solutions offers epoxy resin countertops and workbenches.

Features of Epoxy Resin:

  • Laboratory grade performance
  • Strong resistance to many chemicals
  • Moisture Resistant
  • Extremely hard material
  • Durable and easy to clean
  • Approved for Food Services (NSF)
  • Non Porous
  • Never Requires Sealing
  • Made in the USA

Available in the following thickness

  • ¾ inches
  • 1 inches
  • 1 ¼ inches

Available Surfaces for Epoxy Resin







  • Classic Edge with 1/8″ Radius Corners or 1/8″ Beveled Edge
  • Radius Edge with 1/2″ Radius Edges
  • Marine Edge Tops (For Liquid Containment)
  • Drain Tops
  • Epoxy Resin Table Tops
  • Custom (Upon Request)

Providing Solutions for:

  • Laboratory
  • Healthcare
  • Foodservice
  • Hospitality
  • Architecture
  • Residential

Heat Resistance with Epoxy Resin

Bunsen Burner: A 3/8″ Bunsen burner was adjusted to a quiet flame with a 1-1/2″ inner blue cone and then overturned on the test material, exposing material to the flame for 5 minutes.

Observation: No blisters or cracks were detected on the exposed work surface.

Phenolic Resin

Phenolic Resin

Selecting the right material for laboratory worktops and laboratory furniture is of crucial importance in an environment where tests and experiments must not be contaminated. Phenolic resin tables and phenolic resin countertops are a great choice for these environments.

Hygiene, cleanliness, chemical and stain resistance are key requirements within the lab environment. Worktops in laboratories are especially vulnerable. Phenolic Resin is chemical resistant, hygienic, easy to clean and maintain, durable and flexible.

Phenolic Resin Countertops and table tops meet the requirements of most laboratories while at the same time bringing a range of additional benefits. These benefits include chemical, wear and water resistance.

Plastic Laminate

Laminate-Worksurface Plastic laminate work surfaces and table tops are durable, colorful, resist grease and stains, moderately priced, and are the most widely used of all counter-top materials. All our table tops and countertops have a 3mm edge banning for added protection against chipping and damage.


Plastic Laminate Benefits

  • Cost Effective
  • Multiple Color Choices
  • Resists Grease & Stains
  • Post Form Laminate Allows Multiple Edge Configurations
ESD Laminate

ESD-Workbench-Laminate Today’s companies are looking for every opportunity to cut costs while still maintaining productivity in the workplace. Most of the focus falls on the employee with little attention to the equipment they work on. We have found that even our biggest clients have failed or are not compliant with the ESD industry standards or have the necessary certifications ANSI/ESDS20.20-2007 (please see http://www.esda.org for more information) Just like technology products your ESD workbenches become obsolete losing their ESD properties over time. Our ESD replacement tops are a great solution when you need to update, become compliant or standardize your facility within a tight budget

ESD Replacement Top Specifications

  • All tops are 1.25″ thick.
  • ESD System Includes
  • ESD Laminate
  • Two Wrist Straps
  • Surface Mount ESD Grounding Turret
  • Ground Wires
Maple Block

MapleBlock-Tops The rock-hard edge grain construction of our Maple Butcher Block assures you of the maximum durability and the greatest construction strength available. Our Maple tops are hard at work in factories,kitchens, and on shipping and receiving docks around the world. In the material handling business there is no better top than solid Maple.


Maple Block Replacement Top Specifications

  • 1.75″ thick solid maple top.
  • Urethane finish.
  • Radius edges.
Replacement Tops

replacement-topsReplacement Tops at Affordable Prices

OnePointe Solutions is a leader in replacement tops for industrial and laboratory companies. From ESD work surfaces to Chemical Resistant countertops and tabletops we’ve got you covered. All are tops can be custom fabricated to your exact specs.

ChemArmor Laminate

A high pressure laminate that is an economical solution for chemical resistance within the lab environment. Colors include Beige, Almond, Gray, Graystone, White and Black

Click Here For PDF Spec Sheet

ESD Laminate

Laminate surface ideally suited for a variety of electronically sensitive applications. Made to meet, or surpass all standards for electrical properties even at low humidity levels. Eliminates surface shedding, reducing it to one-tenth that of conventional laminates while providing long-term resistance to surface abrasion. Colors include Beige, Almond, Gray, Graystone, White and Black

Click Here For PDF Spec Sheet

Phenolic Resin

Lab Grade Phenolic is a self-supporting flat panel, based on thermosetting resins, homogeneously reinforced with wood based fibers and manufactured under high pressure and at high temperatures. This process ensures that each panel is pore free and resistant to a large number of aggressive chemicals, easy to clean, disinfect and maintain. The surface is impermeable to bacteria, molds or micro-organisms water-resistant and easy to clean or disinfect. Colors include Black with custom colors upon request.

Click Here For PDF Spec Sheet

Phenolic Resin

Standard Grade Phenolic panels are specifically designed for interior applications subject to intensive use. Standard Grade Phenolic is impact, scratch and wear resistant. Panels are easy to keep clean and as they do not absorb or retain moisture they can be cleaned frequently. Standard Grade Phenolic retains its appearance for a very long time. The combination of a solid, homogenous core with a hard surface based on melamine resins gives Standard Grade Phenolic exceptional impact resistance. Standard Grade Phenolic is highly resistant to wear, making it ideal for installation where heavy use and frequent cleaning are expected. Standard Grade Phenolic is commonly used as office or laboratory worktop. Colors include Black with custom colors upon request.

Click Here For PDF Spec Sheet

Epoxy Resin

Countertops made of epoxy resin are a very popular choice in today’s laboratories. They resist moisture, solvents, heat, acid, and abrasions. Colors include Black, Tan, Blue, White, Gray, Green and Graphite.

Click Here For PDF Spec Sheet

View Our Color Chart


Lab tops and countertops made of epoxy resin that integrates post-consumer recycled material. Greenstone is great for green projects looking to obtain LEED certification and is a very popular choice within healthcare, foodservice, office and today’s laboratories. Greenstone offers low VOC that well below NASA’s screening levels. The surface also resists moisture, solvents, heat, acid, and abrasions. Colors include Black, Tan, Blue, White, Gray, Green and Graphite.

Click Here For PDF Spec Sheet

View Our Color Chart

Stainless Steel

Stainless steel countertops are well-suited to radioactive and bacteriological work, as well as laboratory work involving use of organic solvents. Stainless steel countertops come in a variety of grades and finishes.

Quick Quote